Using GX53 lighting allows the use of our simple connection system. By using the SE11175 6 way distribution block it removes the requirement for Part P of the Building Regulations for installation as up to 6 fittings can be connected to the distribution block which then plugs straight into the mains power supply.
The versatile and varied range of GX53 housings and lamps are all interchangeable, allowing you to create the lighting effect you desire. Simply select the required housing and then the type of GX53 lamp you require.
SE11147SS - Tri light housing only, stainless stee
Compact fluorescent lamps:
• 8,000 hours lamp life
• 40lm lumen per watt output
• 240V
• low maintenance
GX53 lamp options
SE10148 - 7W compact fluorescent lamp,
cool white (4000k)
Compact fluorescent lamps:
• 8,000 hours lamp life
• 40lm lumen per watt output
• 240V
• low maintenance
GX53 lamp options
SE10149 - 7W compact fluorescent lamp,
warm white (3000k)
GX53 lamp options
SE10154BL - 39D 2W LED lamp, blue
LED GX53 lamps:
• very low energy
• 40,000 hours lamp life
• 83lm lumen per watt output
• 240V
• low maintenance
GX53 lamp options
SE10154WH - 39D 2W LED lamp, cool white
LED GX53 lamps:
• very low energy
• 40,000 hours lamp life
• 83lm lumen per watt output
• 240V
• low maintenance
Accessories
GX53 lights - accessories
SE11175 - 6 way distributor block with
1.5m cable and 13 Amp plug*
* Maximum 6 units per distribution block
GX53 lights - accessories
SE11170 - Connecting cable, 0.5m long
GX53 lights - accessories
SE11171 - Connecting cable, 1m long
GX53 lights - accessories
SE11172 - Connecting cable, 2m long
GX53 lights - accessories
SE11173 - Connecting cable, 3m long
Code
Voltage
Wattage*
Lumens / Watt
Finish**
LED Colour
Length(mm)
Width(mm)
Depth(mm)
Hole Cut (Dia.)
SE11140
N/A
N/A
N/A
SC
N/A
N/A
84
25
77mm
SE11142
N/A
N/A
N/A
SC
N/A
N/A
80
18
N/A
SE11146
N/A
N/A
N/A
SS
N/A
N/A
95
30
N/A
SE11147
N/A
N/A
N/A
SS
N/A
185
155
50
N/A
* per fitting
** Finish: SC - satin chrome; SS - stainless steel
IMPORTANT: All light fittings must be fitted by a qualified electrician. Where lights are enclosed in a cabinet, care must be taken to ensure adequate ventilation. Lighting
should not be fitted in close proximity to flammable surfaces.
){kind=link}